This one-day course covers the Arc flash risk assessment described in IEEE 1584. The course encompasses examples of incident energy and flash protection boundary calculations. Basic methods used to calculate fault energy at points on the system are also examined. Fact: A report published in Industrial Safety and Hygiene News1 estimated that, on average, there […]

Ideal for those who have been appointed as an authorising engineer/person mechanical, to advance your knowledge and understanding of steam and boiler pressure systems and how to safely and effectively comply with legislation.

For those who need to refresh their knowledge as an AP for Boiler and Pressure Systems, delegated will re-visit safety rules and procedures, risk assessment and operational duties.

Become an authorised person capable of performing limited switching operations in HV substations and switchrooms with this City and Guilds accredited training programme.

Refresh your knowledge of safely operating HV power systems with this training course (ideal for those who have previously completed the HVS01 course).

Gain the skills to assess the competency of personnel who work on High Voltage systems and issue them with suitable authority.

Learn the basics! Includes an introduction to the wiring regulations, legal requirements, electrical changes, basic electrical principles and more with both theory and practical work.

This CAT and Genny training course is ideal for anyone who works in the utilities, construction, transportation, communications, petrochemical industries or works as contractors in those sectors, who may need to carry out excavation work.

UE Systems |  Level 2  |  CAT II Ultrasound Training Locations: Rotherham, Kirkcaldy Assessment: General, Specific and Practical examinations with a combined score of 80% or better to pass. (Review of weeks material and 2-hour 80-question multiple choice exam) Certificate Gained: UE Systems Category Level 2 Certification Course Duration: 5 Days (32 Hours) Entry Requirements: […]

The two day City & Guilds 2377-77 PAT Testing course is currently available through most of our City & Guilds accredited training centres.

Available nationwide, the industry-standard 18th Edition - City & Guilds 2382-18 will get you up to speed with the latest IET Wiring Regulations and ensure that you are fully compliant.

Take the 18th Edition Update Course if you have already obtained the 17th Edition C&G 2382-15 with 3rd Amendment certificate.

The Online 18th Edition Update Course is designed for those who are fully conversant in the 18th Edition (IET BS 7671:2018) and have completed the examination. It covers the changes and updates made between the old edition and the new 18th Edition. Study at your own pace in your own surroundings as this course is fully accessible online.

The Full Online 18th Edition Course is a cost effective and convenient way for you to study at home for your 18th Edition examination. The course covers all of same syllabus as the 3 day course and allows learners to work through modules in their own pace with the ability to revisit sections as required. The course also includes an exam simulator for you to test your knowledge prior to taking the formal examination.

Learn to perform initial inspection of electrical installations with this fully accredited City and Guilds Level 3 training course.

A fully accredited City and Guilds electrical training course, 2391-51 covers both the theory and practical work required to test and verify electrical installations and is an excellent course for any practising electrician who would like to work more closely with electrical installations.

This training course combines together the City and Guilds 2391-50 and 2391-52 courses and is ideal for anyone wanting to perform inspection and testing on electrical installations.

Aimed at practicing electricians, this course teaches you the fundamentals behind electrical inspection and testing of installations. Ideal for moving on to further courses!

This one-day course covers all building regulations relating to electricians. Becoming qualified with 2393-10 will allow you to register with competent person schemes such as BSI, Gas Safe and NICEIC.

City & Guilds 2921-31 Electric Vehicle Charging Installations The City & Guilds Electric Vehicle Charging Installations qualification aims to provide expert guidance to learners wishing to gain knowledge and understanding of Electric Vehicle charging equipment installations. The course is aimed at practising electricians wishing to upskill, to install and maintain Electric Vehicle charging posts safely. […]

Ideal for Skilled Persons or prospective persons in charge, or those appointed to work on company-specific mechanical systems toward safety rules and regulations. Delegates will gain a greater understanding of legislation, and what is expected of key personnel as well as learning to work more safely and effectively.

Learn the theory and practical skills to safely perform dielectric strength (hipot) testing on high voltage equipment with this training course.

Combining five separate courses taken as-and-when is most convenient for the learner, the domestic electrical installer package allows candidates to gain all the necessary skills to be able to competently carry out electrical work in domestic settings.

Location: Stockton-on-Tees, Watford

The Electricity at Work Regulations (EAWR) Course is an must for anyone who needs to understand the electrical regulations as part of their job role. Whether you are an electrician, a supervisor, or anyone else who works in or around electricity, this course will help you to understand your duties and responsibilities associated with your […]

This course is designed to give you a thorough theoretical and practical understanding of both high voltage and low voltage electrical protective equipment used on industrial and high voltage power systems. Book now by choosing your course date, or call us on 01642 987 978/email training@pass.co.uk for more information Course Details Course Duration 5 days […]

This 2 Day course is designed to provide craft attendants with the knowledge and understanding to safely and competently fulfil their role in supporting low voltage and high voltage cable jointers.

This training course is designed to introduce candidates to the particular methods and techniques required to joint and terminate high voltage cables up to 15kV.

Gain the skills you need to safely perform cable spiking on high voltage cables and ensure you can perform spiking safely with correct equipment.

Learn to safely perform high voltage earth electrode testing with our comprehensive HV training course.

Gain Maritime and Coastguard Agency Accreditation with our five day High Voltage Management Level Course.

Become qualified to receive sanction for test documents in high voltage applications with this course.

Made for those with no prior electrical training, this course will teach you the fundamentals behind inspection and testing and allow you to move on to further qualifications.

Location: Stockton-on-Tees Course Duration: 1 Day Certificate Gained: Certificate of Completion by UE Systems Europe. Entry Requirements: Anyone attending training should also have a good level of both spoken and written English Course Material Requirements: Laptop computers with Software downloaded from www.uesystems.eu (FREE) and bringing your own Ultraprobe is highly recommended, along with Basic PPE Book […]

This Category 1 thermography course meets or exceeds the syllabus requirement as stated in the British Institute of Non-Destructive Testing CMGEN Appendix B syllabus and prepares you for qualification as an ITC category 1 certified thermographer. You will learn about the basics of infrared, how to operate the camera under different conditions and for various […]

Our highest level thermal camera training course, available for those who have completed the Level 2 course.

The LCL Awards Part P course is for electricians wanting a professional qualification in compliance with Part P of the Building Regulations to be able to successfully carry out work to this standard and is held at training centres in Stockton on Tees and Watford, London.

Significantly improve your predictive maintenance program with an ultrasound program at your facility, this course will provide you with in-depth knowledge and the skills to successfully carry out implement ultrasound detection within your business as part of non-destructive test service.

This 4 day course is intended to enhance candidate’s knowledge of statutory regulations, codes of practice, safety procedures and technical aspects of low voltage power systems.

This version of the low voltage cable jointing and termination course is specifically made for working on dead cables only.

Suitable for those with an existing electrical qualification or those working towards one, this course will give you a practical introduction to safely preparing low voltage cables (up to 1000V) for jointing and termination.

Train to safely operate high voltage power systems used in marine/offshore environments with this authorised person HV training course.

Train to be a senior authorised person responsible for performing HV power switching in marine/offshore environments with this City and Guilds Accredited Programme.

Recognising Overhead Lines, Their Components and Inspection Processes This course is intended for Overhead Line personnel involved with the operation of high and low voltage overhead lines (up to and including 400,000 volts) and also those who are responsible for the testing and inspection of associated supporting structures. The course is aimed at DNO’s (Distribution Network Operators) […]

The best route for those new to the PAT testing industry. There's no electrical experience required and you'll get plenty of hands-on experience of using the testers, alongside learning all of the regulations and theory behind PAT testing.

New to switchgear operation? This course is suitable for both electrical/non-electrical personnel and is an excellent starting point if you are aiming for full switching authorisation.

Need to carry out duties such as cleaning, meter reading or other non-electrical maintenance in HV substations/switchrooms? This course will help you to safely enter and work within these environments.

Ideal for caretakers, handymen or members of other trades that may want to carry out small electrical tasks. Learn how to replace sockets, lamps, how to wire plugs and much more.

Book now by choosing your programme date. For more information call us on 01642 987 978 or email training@pass.co.uk for more information Course Details Course Duration 2 days Course Location PASS Stockton HV Training Centre. Venue address is 1 Alberto Street, Stockton-On-Tees, TS18 2BQ. More about venue >> Assessments Written examination and practical examination Certificate Gained […]

Understand the hazards of operating and maintaining electrical equipment within Hazardous Areas.

Train to be a senior authorised person responsible for performing switching operations and issuing safety documents with our fully accredited City and Guilds training programme.

Designed to give a basic introduction to the essential requirements of safe working procedures on steam boilers and steam systems. Ideal for skilled persons and general process staff.

A one day course covering the principles of Ultrasound, procedure and techniques of using Ultrasound technology to detect different types of pressure, vacuum and gas leaks.

This Foundation Underground Cable Fault Location course is great for those who want to learn more about Cable Fault Location of medium and high voltage cables and have had no previous experience. It will provide you with the familiarity of cable fault characteristics and give you an overview and general understanding of the common methods and processes used for cable fault location.

Learn to safely perform switching on both on and offshore wind turbines with our fully accredited City and Guilds SAP authorised wind turbine training programme.

About All Training Courses

Electrical, PAT Testing, Thermography, Health & Safety, Drones and High Voltage Training Courses

Whether you want to expand your skills or move into a new career path, PASS’s range of courses will help you to gain the training you need.

We are City and Guilds, EAL, Logic, ELCAS, MCA certified and offer an extensive programme of courses for different sectors.

For electricians, we offer electrician training including 18th edition and Part P, as well as domestic installer training packages. We also offer a range of high voltage training programmes, including authorised person training, electrode testing, substation entry courses and more.

One of our most popular courses is PAT testing – with our PAT training, you can learn to PAT test your own equipment at work, in your rented properties, or anywhere else where electrical appliance safety is important. For those in the construction industry and other workplaces, we also offer an extensive range of health and safety training including CSCS card training, IOSH and ECITB training.

Our latest range of Drone courses will help to take you that one step further and gain permissions for commercial operations.

Ready to start your training? Find your course below and book online or call us for more information.